A First of Many - Peasant Blouse

When I found this tutorial for a child's peasant blouse at Prudent Baby I just knew that I had to make one for the girls.  If it really was as easy as it looks, then I'd make several.  I mean seriously... what a perfect addition to any little girl's wardrobe.

Well, I am happy to announce that it really was as easy as it looked.  I followed the measurements that were listed for the 18mo - 2T size because, conveniently, that was the exact size that I needed (it's always nice when you can follow the instructions exactly as written instead of having to do the math to make it a different size).  The instructions were perfect and super simple to follow.

I've been really needing some sort of project that could give me some instant gratification and this was definitely a great one for that.  It took me most of the day (between wrangling two toddlers, one of whom was sick) but could have easily been done in about an hour for those people who can sit for an hour and just work on a single project.

Of course, I made a few customizations myself though.  I did not add the waistband elastic piece from the original tutorial.  I might try it out on future versions just for some variety, but didn't feel like it for this one.  But, I did add some cute little pockets on the front.

I really like this fabric because it's almost got a vintage feel to it.  Nora actually picked it out herself when we were at the fabric store this past weekend.  It was cute and on clearance, so of course I couldn't say no.  :)

Another thing that is so awesome about this top... I really think that I could make it using 2-3 fat quarters (depending on the size).  I'll probably try that at some point and let you know how that turns out. :)

As you can see, my model wasn't really up for the job tonight - too busy watching Toy Story. :)

I like how versatile this type of top is.  You can wear it as a shirt, or as a dress.  With short sleeves, long sleeves, or even no sleeves if you wanted.  It's nice and cool when the weather is hot but can also be worn with a long sleeve shirt underneath during the colder months.  I definitely see myself making lots of these types of tops in the future - maybe even eventually one for myself!

large(er) version of my buttercup bag

Remember when I made my first Buttercup Bag and I mentioned that I was going to make another one, but the enlarged version?  Well, I did... and now I'm finally getting around to sharing it with you :)

I made a few changes with this second bag that I think were definitely helpful, and made it turn out even cuter :)

First, I had recently come across this tutorial for making your own custom piping and thought it was really cool looking.  I had also been browsing through Flickr photos of the Buttercup Bag and got a bit of inspiration from other people's alterations.  Mainly, to use the piping on the bag and instead of having a single strap - to make two separate handles.

So I set out to make my own custom piping to match the lining fabric that I was using.  I didn't have enough fabric to cut my strips of fabric on the bias, but that was really not necessary for this project.  I could see where it would be necessary if we were putting the piping around lots of curved edges, but this was a pretty straight line, so it wasn't necessary.

I simply stitched the piping to the upper outer part of the bag before attaching that piece to the lower outer piece. It's really nice that if you don't get quite close enough to the edge of the piping then you can always re-stitch it to get closer.

Do you notice anything else a bit different about the photo above?

Instead of stitching the pleats in the lower outer pieces, I got a little lazy and just did a gather instead.  Honestly, I almost like the look of it better... plus it was much quicker than having to measure, press, pin and stitch all of those pleats.

For the handles, I simply measured out how long I wanted them to be, then cut strips of fabric (two of the outer fabric, two of the lining) of that width and length plus my seam allowances.  I pressed the edges of each piece and then did a top stitch all the way around to have the two pieces of fabric attached.  Oh yeah, I also used some heavyweight fusible interfacing on the outer fabric to give it a little more strength.

Once the handles were assembled, I just marked where they should be, pinned and then stitched them as I was stitching the outer and the lining together.  Simply make sure that your handles are on the right side of the outer fabric, but sandwiched between the outer and the lining (before it is turned right side out)... sorry, I forgot to get a photo of that part (I know it's a bit confusing, but maybe you get what I'm trying to say).

And here is the final product...

the outside

and the inside

Not too shabby huh?

*oh yeah, I kinda ad-libbed the pocket too - the size that the pattern called for was a little too small for what I needed.

Another difference between this finished bag and the first one I did (following the pattern exactly) was that I did not put in a magnetic closure... actually, I didn't add a closure at all.  I honestly didn't think it was necessary, especially with the double handles.

I've been carrying this bag around ever since I finished it, and I just love it!  It's still a little on the small side for me (I'm more of a big purse kinda girl), but it holds my essentials and is comfortable to carry.

I'll probably try to make another one sometime this year, but try enlarging the pattern even more.  I'd also like to try adding in a zipper closure maybe.

Autism Awareness Bow Tie

I got a message from a friend of mine last week asking for some help with a project.  Annie teaches Autistic children, and has been making some flower pins for her fellow teachers using the Autism puzzle print fabric.

There was one issue though, the school's Principal is a man... and well, she didn't think that he'd be very willing to wear a flower pin.  He does wear bow ties though!

This is where I come in... Annie asked if I could help her make a bow tie for her Principal.  That sounded like fun, and pretty easy so I told her I was in.

So, before she came over I wanted to be prepared and have the pattern and supplies ready.  It's kind of hard to find a free bow tie pattern.  The first one I found didn't really work too well when I tried to print it, so I looked some more and found a post on Greg's Blog.  The instructions show how he used a bow tie that he already had to trace a pattern.  After a few requests, he drew up the pattern to share with the rest of us.  You can find his pattern in the comments on his post.

Anyway, here it is... don't laugh at the photo (this was the best we could do with tying the bow tie - it definitely takes practice)

Cute huh? It will look even better on her Principal (who does wear bow ties, so we figure he actually knows how to tie them correctly).

Have you ever made a bow tie?  Do you know anyone who would wear one?  This was definitely a super simple project and was quite quick to finish.  I could totally see making up a whole stash of these in an afternoon.

Next, I'd love to try to make some already tied ones with an elastic adjustable piece for younger boys.  They'd make great gifts for friends to use for holidays or other special occasions.

---

the "Kate" dress

I have seen tons of tutorials all over the internet showing how to attach a skirt to a shirt and make a dress.  I've seen tutorials for girls of all ages and had been wanting to finally make one myself.  Today, I finally did!  I didn't follow any specific tutorial that was out there, just kind of made it up as I went along... so I figured I'd share my own tutorial on what I did.  And just for fun, I'm going to call this the "Kate" dress - just cause it's fun to name stuff :)

Supplies:

• Shirt
• Fabric for the skirt
• coordinating fabric for the band at the bottom and the optional belt/tie
• sewing machine
• matching or coordinating thread
• scissors
• measuring tape

Step 1:  Choose your shirt
The shirt you choose should fit your child, at least in the head/arms/chest area.  This is a great project for tops that are stained on the lower half or are a little short for normal wear.  Ours fell into the category of simply being too short.

Step 2: Measure and Cut
Figure out where you want the skirt to begin, and mark it.  Add a half inch to this mark (for seam allowance) and cut the bottom of the shirt off.  Since the shirt I chose was a polo shirt, I made mine fall about 2 inches below the bottom button.  In retrospect, I should have made it closer... maybe just one inch below.

Step 3: Measure some More

Lay your shirt out flat and measure across the bottom.  Mine was 11".  Take this measurement and multiply it by 2.  This is the width that your skirt fabric should be.  Now, figure out low long you want the dress to be, then add an inch for seam allowances - subtract the width of the band for the bottom (in Step 5).  It's easiest to measure the person who will wear it... but if they are unavailable, then you'll have to just wing it.  I measured, but still somehow mine turned out way longer than I intended.

Step 4: Cut your skirt using the measurements from the step above.  You'll need two pieces - one for the front, one for the back.


Step 5: Cut the piece for the bottom band.
Decide how wide you want your bottom band to be, then cut a strip of fabric the same width of the skirt piece but the height that you want it to be plus 1 inch.  You need two pieces, just like you did for the skirt.

Step 6: Sew the band to the skirt.  Make sure right sides are together.  Press.

** I like to zig zag stitch the raw edges together (or serge it if you have a serger).  It makes for a more professional look and is more durable as well.

Step 7: Sew the gathering stitch at the top of the skirt.

At the top of each skirt piece, make your gathering stitches - I like to make 2... one at 1/2 inch and one at 1/4 inch.  I'm not completely sure what the purpose of this is, but I've seen it lots other places.  It does always help me if I break one of the strings while I am gathering then I still have another to work with so that I don't have to start over.
Oh, and for a gathering stitch... you just need a really loose straight stitch with no backstitching at the ends.  This way you can pull the thread at the ends and gather your stitching.  I've also seen people make their tension on their machine really tight, and the stitch really loose and the machine can gather it automatically for you.  This has never worked for me... but try it if you'd like.

Step 8: Sew your skirt together

Place your front and back skirt pieces right sides together.  Stitch up the side seams making sure that your bottom border pieces match up evenly.  Zig Zag or serge the raw edges and press flat.

Step 9: Hem the skirt

Go ahead and hem the bottom of your skirt at this point. I like to fold the edge over 1/4" and press, then fold over again and press, then stitch.

Step 9: Gather your stitches

I like to go ahead and gather my stitches as tight as they will go... or at least pretty closely (be careful to not break your strings though).  If you gather it much smaller than you know it should be then you can always spread out your stitches to the actual width a little easier and spread them out evenly.
 

Step 10: Pin your skirt to your shirt

To start, you should make sure that your right side of your shirt and the right side of your skirt are facing each other.  Slide the shirt inside your skirt (right sides facing) and line up the edges.  I like to start pinning at the side seams.

Step 11: Stitch your skirt to your shirt.
Stitch your top ans skirt together and then Zig Zag the raw edges and press flat.

Step 12: See what you've got!
Turn your dress right side out and see how far you've come!  Looks great doesn't it?  Now, you can leave it as is and have a perfectly beautiful dress... but why stop here??

Optional:

Step 13: Do a little topstitching...

With your dress turned right side out, top stitch around where the skirt and shirt meet, also top stitch on the band.  The top stitching gives it more of a professional look, and also helps reinforce your seams a bit.

Step 14:  If you want, add a little belt/tie
I thought it would be cute to add a little belt to this... my daughter had other ideas and didn't want to wear it.  If you'd like one... choose your fabric (I made mine the same width as the original skirt pieces 22")  YOu'll need one piece twice the height that you want the finished belt to be... mine was 1" tall so I cut it 2".

Fold and press the fabric in half (right sides together) then stitch around the open edges - leave the ends open for turning.

Turn belt right side out and press flat.  Fold in the edges and press those in too.

then Top stitch.

Ta-Da!  You are done... now go find your favorite little girl and try it on!

I had a feeling that mine was a little long... and when I tried it on NK, it fit - but was definitely on the long side.  I wanted to fix it, but she had other ideas.  Apparently the dress was a hit because she didn't want to take it off.  She wore it all day long :)

She even let me take her picture :)  It's pretty rare that she'll allow me to take her picture anymore, so this was great!

Anyway... hope you enjoyed my little tutorial.  I hope this was helpful!  If you have any questions, please ask in the comments section.  If you make one... I'd love to see it!

No Sew (Adjustbale) Tutus!

Tutus... aren't they just the perfect item for any little girl's wardrobe? Perfect for photos, and playing dress up, even for wearing just to cheer yourself up? hehe You just have to smile when wearing one... or maybe that's just me - I can't help but smile when either of my girls is wearing their tutu :) It's just too cute!

Anyway, so I've mentioned all the snow we got here... I really wanted to dress the girls up in something cute and take them out for a fun photo shoot in the snow. I thought that a bright tutu would be the perfect accessory to their winter coats and hats. Right?

The only problem was that we only had one tutu and two kids. So, of course... I made one! I think my husband thought I was a little nutty - but he often does, so who cares?

And so is born this little tutorial for making a super simple tutu... for girls of all sizes! It can even be made so that it's adjustable - to grow with your little one... how's that for awesome?

I'll say this now... please forgive me for the awful photos. I was in a rush and just grabbed my little camera... I think you'll get the idea though.

Supplies Needed:

• elastic - a few inches longer than your little ones waist (mine was 1.4 inch width - but pretty much any width will do)
• tulle - I used 3 spools that had 15 feet of tulle each, you will need more or less depending on how big around your child is, how long you want the skirt to be, and how full you want it to be
• scissors
• a large book, bowl, cardboard piece, frame, box, etc to use to hold your elastic in place temporarily

 Start by measuring the waist of your child, then cutting your elastic about 1.5 -  2 inches longer than that measurement.  The extra length will give you room to adjust the waistband when your child grows.

Tie the ends of the elastic together a little smaller than the child's actual waist measurement.  This will make sure that the waistband fits snugly enough to not fall off, but not too tight.

Now, cut your tulle.  If you are using a spool of tulle (haha... say that 3 times fast! ;)), then roll out the pieces and cut.  The length of the strip should be twice the length that you want your actual skirt to be.  Mine was cut to approximately 22 inches.  Keep doing this until you have cut all of your strips.

I cut one spool at a time because I didn't know how many spools it would take to get my desired effect.  I recommend doing it this way to avoid cutting too much.

Now, find a book, piece of cardboard, frame, whatever you can find that you can stretch your elastic waistband around.  This will be helpful to hold everything in place when tying the tulle to the elastic.

Start by taking a strip of tulle and folding it over in half, then making a slip knot over your elastic.  You could also just knot it on there I guess, but the slip knot looks neater and is probably a little more comfortable on that little waist. You can even do multiple layers of tulle at once - this will make it more full of a skirt.

Keep doing this all the way around your elastic until it is as full as you'd like!

If the length of your skirt is too long or the lengths of your strips aren't even (and you want them to be even) then you can always just trim the bottom until its at your desired length.  There is no shame in letting it be different lengths either though... it's kind of fun that way.

Ta-Da!  Try the tutu on your child and watch as she has lots of fun playing in it and feeling beautiful!

Or head out in the snow for a fun photo shoot like I did!  Here are a few photos I took...

And this one (the tutu), I didn't make... but I couldn't leave my littlest cutie out of the photos!

Gathered Clutch

I followed this Gathered Clutch Tutorial at Noodlehead.

I've been wanting to make one (or some) of these ever since I came across the tutorial on Noodlehead a few months ago.  I could never find the time with all the other things I was trying to get done... plus I had never made anything with a zipper before and it was a little scary.  My mom used to complain about sewing zippers so I was kind of scared off from the begining.  But after looking through the tutorials, it really didn't look all that difficut.  Maybe it's different in clothing or something... who knows.

Anyway... it's my Sister-in-Law's birthday and I figured there was no better occasion to try these out.  It's hard to think of something to get someone especially when their birthday is right after Christmas, but I figured this was something different and totally unique.  I hope she loves it!  We stashed a gift card inside as well.

Here's a view of the inside.  It features a divider pocket and 2 card pockets.

Here are a few things I thought of when making this... Notes for Next Time:

As Anna says in the tutorial, the part that is going to take the longest is cutting the pieces.  So true - especially since I wasn't completely following directions and ended up wasting interfacing and outside pieces because I ironed them wrong.  Oh well - I'll just save it for the next time when I need those pieces.

The instructions called for an 8" zipper - all I had was a 7"... so I simply extended the size of the tabs to make the entire zipper piece a total of 8.5" as stated is necessary.  This worked out great, the zipper is the exact right size for this bag.

I didn't sandwich my lining/outside/zipper pieces just right when I was attaching the second one.  Therefore, the raw edges show.  It's not so bad, but it wouldn't look like such a mistake if I had messed up on both sides instead of just the one side... oops.

I think I'll make some bags with it gathered on both sides.  Also, I may use ribbon instead of the fabric band.

I really want to dress up the band a little more.  Maybe I could even take the time for some little embroidery design or something on a solid band.  *If I ever get my embroidery machine then I might even make some monogram ones :)

By altering the size of these some, they would make a really cute diaper clutch.  Great gift idea for any new Mom!

I could really go on and on - the possibilities are endless!

Houndstooth Clutch

Ok, so it doesn't have to be houndstooth - but mine is :)

How cute is this?

I made it using a freebie pattern that I found at ithinksew.com.  I figured, it be a really cute, quick something to make and there are endless possibilities of what you could to do customize this little clutch.  I decided it was best to start with the pattern as written, then for future ones then I could do something a little different.

The pattern is for beginners, but there do seem to be some instructions that are implied.  Pay attention to what you are doing and think twice before you stitch - otherwise, you'll end up ripping seams (like me).

This is the second pattern of theirs I have tried (... more about the first one later).  I found a pattern that I really like for a new purse too.  Their patterns are really adorable!!

Things I did differently, or noticed for next time...
I didn't have a magnetic closure, but I did have velcro... so I used velcro - which was iron on, so no extra stitching :)

There is a pattern piece for a handle - this is optional, mine obviously didn't have it.  The instructions for adding this handle are at the very end of the instructions pages, so I had actually cut out a piece and still have it left over for next time (guess I'm making another houndstooth one :)).  So if you want the handle, check the instructions at the end of the packet before you begin.

When you add the lining and the exterior together, it simply says to put the right sides together (which is correct... but it doesn't exactly tell you that you should fold the flap piece into the inside of the bag before you add the lining.  So, make sure you fold it in before you stitch the lining in place otherwise, you'll end up with a bag with the flap hidden somewhere inside the lining.

And I'm not really sure how this happened... but my lining is a bit baggy and too big for the inside of my bag (the lining is bigger than the exterior).  Not sure what happened, because I really did follow instructions and used the right size seam allowances.

Anyone else want to try and make one?  I'd love to see pictures!